Page 4 - Laserline-Services

Idea & Application Laboratory

In the application laboratory, we jointly plan your laser production

process. Here, various material processing applications are
realized under production-like conditions.

A team of highly qualified and experienced application In order to ensure optimal results, we also carry out
engineers will take care of the first feasibility studies evaluations such as metallography/microscopy, sample
and advise you on that basis in terms of laser system preparations and hardness measurements.
design and selection of suitable beam sources. Besides
applications like welding, brazing and coating, there are Examples for application tests
also heat treatments as well as additive manufacturing
applications possible. By this, production-like conditions > Welding of steel and aluminum, with or without filler wire
> Welding of steel and aluminum with multi-spot module
can be realized while the functions of the designed laser by Laserline
system can be reliably tested.
> Welding of copper and copper-aluminum joining
combinations
When a sustainable concept is set up, a prototype > Remote welding with scanner
of the laser system can be created and tested under > Additive manufacturing / 3-D printing
production-like conditions. The systems for series > Brazing with filler wire
production integration will not be finalized let alone
finally delivered until it is certain that the application runs > Brazing with multi-spot module by Laserline
> Cladding / coating with wire and powder
as planned. In addition, we support the application at > High Speed Cladding
customer site and help with their process development. In > Repair welding
this way, step by step and in close coordination with you,
a laser solution is developed that is tailored exactly to > Hardening
> Welding thick sheets
your individual needs.
> Plastic welding
> Softening
Because of the modular design of the diode laser,
subcomponents can be combined in different ways. > Drying
Special spots or optics pose no problem whatsoever. > Cutting
> Special applications

In the application laboratory, it is about the perfect realization of your application idea.
For this, a team of highly qualified and experienced application engineers will take care of the first feasibility
studies and advise on that basis in terms of plant design and selection of suitable beam sources.