Page 4 - Laserline-OTS-optics-OTS Optics-power-on-the-spot
P. 4
The Laserline typical consistently
modular system ensures investments
and guarantees adaptability to new
tasks and process parameters.
Processing Optics OTS-3
Modular design
The basic design of our processing optics consists of
a standardized optical fiber connector LLK-B/-D (items
3 and 4), a collimating and a focusing lens (items 7 and 18,
respectively). Thanks to a wide range of lens systems and
equipment options, the Laserline system modules can be
transformed into a tool optimally adapted to the particular
application. The laser beam can be shaped into a focus
with almost perfect homogeneity in energy distribution via
a homogenizing element with special lens system (item
15) or into almost any possible focus geometry via the
multi-spot module (item 17).
Processing Optics OTS-5
These optics can be supplemented by additional
components, such as powder nozzles (items 22 and 23)
or wire feed units. Numerous extensions are available to
meet the requirements for a safe production process.
The integration of coupling units (item 12 and 13) allows
a utilization of pyrometers (items 8 and 9) to measure
temperature radiation or CMOS cameras (item 10) for
process monitoring. A quick-change cover slide (item 19)
allows the rapid exchange of contaminated cover slides,
even in inaccessible parts of the system. By means of
cover slide monitoring, it is also possible to monitor and
visualize the degree of contamination.